3-6-7 Registered character settings: RKC
Sets the input format of the "Registered characters" function used to switch characters by I/O input.
⿎ Setting request data / response data for readout
Start
RKC
code
Sub command is "S" for the setting request data and the initial setting "A" for the response data for readout.
⿎ Readout request data
Start
RKC
code
⿎ Data description
Name
Data length [byte]
I/O input format
Total data length
⿎ Example of command settings
Condition:
I/O input format = 1
• Setting
Transmission data
• Readout
Transmission data
Response data
Reference
• Registered characters (via I/O) cannot be set together with the following functions in one file.
• Characters specified by SIN command
• External offset function with "Using SEO command"
• On-the-fly marking at regular intervals
• On-the-fly marking with multiple triggers
92
Sub command
R
(Check sum)
Data contents
"0": 4-bit x 4
1
"1": 8-bit x 2
1
The data length is fixed.
[STX]
RKC
[STX]
RKC
[STX]
RKC
[I/O input format]
1-byte
End code
It is the assignation method of the data number
for I/O terminal.
S
1
[CR]
R
[CR]
A
1
[CR]
ME-LPGS-SR-5
(Check sum)
End code
Remarks