Table of Contents
Advertisement
surement accuracy range or the dis-
play range, refer to the column of
page 27 on this manual.)
◆ To exit measurement, proceed to
step 7. To take another measure-
ment, press the RESET button and
continue from step 4.
Average Measurement (example using five times as the average)
Make sure that average measurement is selected.
(For the method of setting the number of measurements to be taken, re-
fer to "Setting the Number of Average Measurements" on page 21.)
4
Check to ensure that the
READY lamp is illuminated
once "n-5" has been dis-
played.
5
-1
Place the measuring
probe vertically on the area
to be measured, and then
apply gentle pressure until
it clicks into place.
◆ The measurement will be carried out
and the number of remaining mea-
surements will be displayed.
25
Advertisement
Table of Contents
