X100-X103 Drive-Cliq Interfaces - Siemens SINAMICS S120 Manual

Figure 4-6 Mounting a PC board connector (Phoenix Contact) in the measuring socket
4.3.2.2

X100-X103 DRIVE-CLiQ interfaces

Table 4-2
Connector
type
The blanking covers for the DRIVE-CLiQ interfaces are included in the scope of delivery.
Blanking covers (50 x) Article No.: 6SL3066-4CA00-0AA0
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
X100-X103 DRIVE-CLiQ interfaces
Pin Signal name
1 TXP
2 TXN
3 RXP
4 Reserved, do not use
5 Reserved, do not use
6 RXN
7 Reserved, do not use
8 Reserved, do not use
A + (24 V)
B M (0 V)
DRIVE-CLiQ socket
Control Units and operating elements
4.3 Control Unit CU320-2 PN (PROFINET)
Measuring socket
PCB connector
Technical data
Transmit data +
Transmit data -
Receive data +
-
-
Receive data -
-
-
Power supply
Electronics ground
51