Refresh Settings - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

Refresh Settings

Set link refresh ranges between the devices of the CPU module and the link special relay (SB), link special register (SW), and
link devices of the master/local module, or between the module label of the CPU module and the link special relay (SB) and
link special register (SW) of the master/local module.
Setting procedure
The procedure for the refresh settings is shown below.
1.
Set the required items.
2.
Click the [Apply] button to finish the refresh settings.
Setting items
Item Description
Device Assignment Right-click in the setting window and select a link device assignment method from
Method the "Device Assignment Method" menu.
• Start/End: Enter the start and end numbers of link devices.
• Points/Start: Enter the points and start numbers of link devices.
Setting range
• Start/End
• Points/Start
(Default: Start/End)
2 PARAMETER SETTINGS
2.3 Basic Settings
2
133