Table of Contents
Advertisement
PRAESENSA
5.7.5
Multifunction power supply
On the Action definitions page of the Multifunction power supply the Control inputs and
control outputs could be defined.
1.
2.
3.
Item
Name [#0n]
Function
Operation
Call definition
Depending of the selected Function, different parameters could be selected, entered,
added/removed. See Assigning a function, page 85 for descriptions.
Submit
Configure control inputs
See Assigning a function, page 85 for functions and Assigning an operation, page 84 for
operations available for the Mps.
Each of the eight control inputs listed can be individual configured. To do so:
1.
2.
3.
Configure control outputs
1.
2.
Bosch Security Systems B.V.
Below the Action definitions configuration page, click Multifunction power supply (Mps):
–
A screen appears with on overview of the connected Mps(s).
Select and click the name of the Mps to be configured.
–
A row called Control inputs appears.
–
A row called Control outputs appears.
Click the + of the Control inputs row:
–
A screen appears listed the eight Control Inputs each with the following items:
Value
Static text
Static text
Selection
Selection
Button
Select the operation (and Call definition) from the dropdown list.
Select, enter and/or add/remove the parameters belonging to the selected function.
Click the Submit button to store the settings. See also Save configuration, page 102 .
Click the + of the Control outputs row:
–
A screen appears listed the eight control outputs.
With the exception of Zone activity, the Name and the function of the control outputs are
static and can only be changed in the section Multifunction power supply, page 53 .
–
Notice that the Zone activity function requires: Priority range selection (Higher and
lower priority) between 0 and 255 and zone selection.
–
Notice that if the function text is called Disabled, the control output is disabled in
the section Multifunction power supply, page 53 .
Description
Shows the name of control input which is entered in
section Multifunction power supply, page 53
Shows the name of the function which is selected in
section Multifunction power supply, page 53 > control
inputs chapter
Select the operation of the function which is selected
in section Multifunction power supply, page 53 . See
also Assigning an operation, page 84 .
Select the call definition which is created in section
Call definitions, page 81
Click the Submit button to store the settings: Notice
that you always have to Save the configuration. See
Save configuration, page 102
Configuration manual
Configure the system | en
2020-09 | V1.20 | PRAESENSA 1.20
93
Advertisement
Table of Contents
