Table of Contents
Advertisement
18
en | Getting started
Install the software
All PRAESENSA software is only made available online. Here you could find also updates and
new releases. Please read the online PRAESENSA release notes before you download, or
update, software. Release notes contain last minute changes and remarks. See Related
documentation, page 7 , if required.
If the software will be installed for the first time, proceed as follows:
1.
2.
3.
4.
5.
6.
7.
8.
2020-09 | V1.20 | PRAESENSA 1.20
If not already done, turn‑on the power of the PRAESENSA system:
–
All network devices boot and the 19"-devices show the (yellow device fault) LED on.
–
A call stations shows connecting on the display.
–
See also Device options, page 43
Ensure you are logged on to your computer as an administrator.
–
You need (Windows) administrator rights to install/save.
–
Check if you use a Windows 32‑bit or 64‑bit operating system. Notice that some
(optional) software could be possible only made available for a 64‑bit operating
system.
Go to www.boschsecurity.com > Product Catalog > Choose your region and country:
–
Type PRAESENSA in the search text box >
–
Select and click the PRAESENSA product page of the System controller >
–
Select and click Downloads > Software on the product page >
–
Select PRAESENSA Installation Package x.xx.zip and and other (optional) files, if
required.
–
Save PRAESENSA Installation Package x.xx.zip files to a safe location on your
computer's hard drive.
Go to
https://licensing.boschsecurity.com/OMNEO/html/load.htm?1000
the Firmware upload tool Vx.xx (where x.xx is the version release number and will be
changed at updates) to a safe location on your computer's hard drive. It includes:
–
SetupOMNEOFirmwareUploadToolBundle(64).exe (two versions 32‑bit and 64‑bit).
Browse to, and unzip, the PRAESENSA Installation Package x.xx.zip file on your
computer's hard drive.
Browse to the other (optional) files on your computer's hard drive, if required.
Browse to, and run, all .exe (without * character in front) of the unzipped PRAESENSA
Installation Package x.xx.zip file including
SetupOMNEOFirmwareUploadToolBundle(64).exe (32 or 64‑bit *.exe version) and run
other (optional) files, if required:
–
Follow the onscreen instructions.
–
If the installation does not start automatically, check/run also the .exe files of the
redist directory of the Installation Package x.xx.
In the following order, see also:
–
Check/Upload the devices firmware, page 20
–
Optional: Install the Logging Server, page 22
–
Optional: Install the Logging Viewer, page 23
Logon the application, page 35
–
Configuration manual
PRAESENSA
and download
Bosch Security Systems B.V.
Advertisement
Table of Contents
