Optional: Install (Omneo) Network Docent - Bosch PRAESENSA PRA-SCL Configuration Manual

PRAESENSA
OMNEO Control software installation
The OMNEO Control software is optional PRAESENSA software. See (Mandatory) software,
page 16 . It can be downloaded from the Bosch download area:
licensing.boschsecurity.com/OMNEO/html/load.htm?1000. It is named as OMNEO control
Vx.xx (where x.xx is the version release and will be changed at updates and new releases).
The OMNEO Control software is available for the Windows operating system.
–
1.
2.
3.
4.
Refer to
–
3.2.7

Optional: Install (OMNEO) Network Docent

Network Docent is developed to help AV operators in their daily job. The software scans and
visualizes the network environment, giving insight into all devices and cable-connections of a
network-based AV system. Network Docent is able to identify and provide guidance on solving
common and simple network errors that cause disruption or improper operation of the AV
system. As a result, Network Docent will reduce time and effort, when installing or operating a
network-based AV system.
Features
–
–
–
–
–
–
–
Installation
The Network Docent software is PRAESENSA optional software. See (Mandatory) software,
page 16 . It can be downloaded from the Bosch download area:
licensing.boschsecurity.com/OMNEO/html/load.htm?1000. It is named as Network Docent
Vx.xx (where x.xx is the version release and will be changed at updates and new releases).
–
Bosch Security Systems B.V.
Download the software file as follows:
– The installation process is described in a separate manual, called: OMNEO Control
Software. See the Bosch download area:
OMNEO/html/load.htm?1000.
Go to https://licensing.boschsecurity.com/OMNEO/html/load.htm?1000
control Vx.xx and be sure to select and click the right version for your system (the 32‑bit
or 64‑bit software version).
– Pressing the hotkey Windows+Pause will open a window with information about your
system.
– The download is a .zip file archive. Zip file archives have a .zip file name extension.
Save the .zip file to a folder on your Windows computer.
Windows will unpack the downloaded .zip file archive when you right click on the file
name and select Extract.
– Follow the onscreen instructions.
Regularly check the OMNEO control Vx.xx software for updates and new releases.
Related documentation, page 7
Detection and visualization of OMNEO devices connected to the (PRAESENSA) local
network.
Detection and visualization of Ethernet switches with LLDP (Link‑Layer Discovery
Protocol).
SNMP (Simple Network Management Protocol) support.
Configuration and communication error detection.
Error and event log.
Troubleshooting knowledge base.
List of connected endpoints and alerts.
The installation process is described in a separate manual, called:
https://licensing.boschsecurity.com/
Configuration manual
Getting started | en
https://
> OMNEO
https://
2020-09 | V1.20 | PRAESENSA 1.20
25