Bosch PRAESENSA PRA-SCL Configuration Manual page 95

PRAESENSA
Configure call station extension button action
In the Call station extension section, the properties of the buttons of the call station extension
can be defined. To do so:
1.
2.
Item
1 xxx [#01]
Operation
BGM channel
selection
> and <
Depending of the selected Function, different parameters could be selected, entered,
added/removed. See Assigning a function, page 85 for descriptions.
Submit
Configure buttons
See Assigning a function, page 85 for functions and Assigning an operation, page 84 for
operations available for the call station (extension) buttons.
Each of the buttons listed and can be individual configured. To do so:
1.
2.
3.
Recorded messages
Recorded messages selection is only visible/possible if this function is enabled in Call station,
page 59 .
1.
2.
3.
Bosch Security Systems B.V.
Click the + of the (call station) Extension row:
– A screen appears listed the following items.
Select the items to configure the actions of the Call station extension
Value
Static text
Selection
Enable /
Disable
Buttons
Button
Select the Operation from the dropdown list.
Select, enter and/or add/remove the parameters belonging to the selected Function.
Click the Submit button to store the settings. See also Save configuration, page 102 .
Click the + of the Recorded messages row.
Select the call definition:
– Note: Do not select call definition with Live speech set to "Yes".
Click the Submit button to store the settings. See also Save configuration, page 102 .
Description
Shows the number and name of each of the buttons of the
call station extension selected and cannot be changed.
Select the Operation of the Function which is selected in
section Call station, page 59 . See also Assigning an
operation, page 84 .
BGM channel selection is only available when the Function
Select zone(s) is selected.
Enable: Selection of the BGM channel(s) which is/are
created in the section BGM routing, page 79 . The configured
BGM routing can be used on the call station Music screen for
these specific selected Zone(s). A maximum of four music
sources can be assigned to one Zone and will be shown in
the display.
Using the > and < buttons, a BGM routing channel can be
selected (left area box) and added or removed from the
assigned BGM routing channel (right area box).
Click the Submit button to store the changes. Note that the
changes are not permanent and active until the configuration
is saved. See Save configuration, page 102 .
Configuration manual
Configure the system | en
2020-09 | V1.20 | PRAESENSA 1.20
95