Optional: Install The Open Interface - Bosch PRAESENSA PRA-SCL Configuration Manual

PRAESENSA
3.2.9

Optional: Install the Open Interface

The Open Interface application software is part of the PRAESENSA optional software. See
(Mandatory) software, page 16 (*.zip). If you want to use the Open Interface with third party
applications, it needs to be installed on your PRAESENSA configuration computer.
To install, proceed as follows:
1.
2.
3.
4.
Bosch Security Systems B.V.
Browse to, and run, the file named: Bosch.OpenInterface‑Net‑installer.exe
– The setup program Open Interface starts.
– Follow the onscreen instructions.
A notification is displayed when the installation is finished.
Go to Open interface, page 114 and Optional: Using the Open Interface, page 132
Continue with: Logon the application, page 35
Configuration manual
Getting started | en
2020-09 | V1.20 | PRAESENSA 1.20
29