Bosch PRAESENSA PRA-SCL Configuration Manual page 82

Public address and voice alarm system
Hide thumbs Also See for PRAESENSA PRA-SCL:
Table of Contents

Advertisement

82
en | Configure the system
Item
Live speech
Attenuation
End tone
Attenuation
Continue call
Audio input
Schedule
Start time
2020-09 | V1.20 | PRAESENSA 1.20
Value
Description
Selection
If the announcement must contain live
Yes / No
speech, set the Live speech option to Yes. If
the announcement does not contain live
speech, set it to No. If No is selected a
Schedule announcement could be selected
(see Schedule following).
Selection
Adjust the attenuation to set the volume level
(0 dB‑20 dB)
of the live speech.
Selection
If the announcement must use an end tone,
select a tone from the End tone dropdown
list. See Recorded messages, page 68 and
Tones, page 153 for an overview of
pre‑defined .WAV audio files.
Selection
Adjust the attenuation to set the volume level
(0 dB‑20 dB)
of the End tone.
Selection No /
No stops the announcement immediately if it
After
was overruled by another announcement.
interruption
After interruption continues or restarts the
announcement if it was overruled by another
announcement and/or not completed.
IMPORTANT: From software release 1.10
onwards, Continue call is forced set to NO
when Live speech is set to Yes and Priority is
set to a priority higher than 223 (i.e. an
evacuation announcement/call).
Selection
If Live speech is set to Yes, use the Audio
<Default> /
input list to specify the input that must be
input
used. Notice that the inputs 9 up to 16 are
secured (Dante/AES67) channels to the
amplifier.
Select <Default > if the Live speech is
originating from a call station (microphone).
Selection
If Live speech is set to No, the schedule
Enable / Disable
could be set.
Enable: will enable announcement scheduling
and will remove the maximum call duration.
Enter the start time of the first
announcement in the Start time text box.
Enter
Enter the start time of the first
hh/mm/
announcement in the Start time text box and
Enable/Disable
Enable the days on which the announcement
day
schedule is active.
Configuration manual
PRAESENSA
Bosch Security Systems B.V.

Advertisement

Table of Contents
loading

Table of Contents