All Devices Events - Bosch PRAESENSA PRA-SCL Configuration Manual

Public address and voice alarm system
Hide thumbs Also See for PRAESENSA PRA-SCL:
Table of Contents

Advertisement

PRAESENSA
18.1.2

All devices events

The following events can occur on the following types of PRAESENSA devices: system
controller, amplifier and call station. All events in the Group: Call, log the call‑ID that is
generated by the system controller.
The all devices events are divided in three groups:
and are listed in the following paragraphs.
Device call (announcement) events
Event: Call change
Group: Call
Occurrence: Logs the change in outputs/destinations of a call (announcement). Occurs
when output resources are: overruled, missing or added/removed manually.
Originator: Control input, Open Interface client or device, which caused the change of
resources.
Extra information: Name(s) of the output(s) that were removed from the call
(announcement).And/or name(s) of the output(s) that were added to the call
(announcement).
Event: Call end
Group: Call
Occurrence: Logs the end of a call (announcement).
Originator:
Extra information: Completed phase of an ended call or abort reason and active phase of an
aborted call.
Event: Call start
Group: Call
Occurrence: Logs the start of a call.
Originator: Control input, Open interface client or device, which started the call
(announcement).
Extra information:
For an original call (announcement) the following information is displayed:
Bosch Security Systems B.V.
Device call (announcement) events,
General device events and
General device fault events,
In case of an overruled call, in case of lost resources or in any case the system decides
to end the call: the system controller as device is logged as originator.
In case of an ended call by a stop command: the originator of the control input is logged
as originator.
In any other case: Control input, Open Interface client or device, which caused the end
of the call.
call definition name used for the call.
priority of the call.
routing scheme (non-partial, partial, stacked)
timing scheme (immediate, time-shifted, pre-monitored)
name(s) of the start tone/message(s) of the call
name(s) of the message(s) of the call
Configuration manual
Event messages | en 139
2020-09 | V1.20 | PRAESENSA 1.20

Advertisement

Table of Contents
loading

Table of Contents