Bosch PRAESENSA PRA-SCL Configuration Manual page 28

28 en | Getting started
Dante Controller features
Once you install Dante Controller on your PC or Mac and connect it to a network, you can use
Dante Controller to:
–
–
–
–
–
–
–
–
–
–
–
–
Installing or updating Dante Controller
Go to
can be downloaded. For compliancy to the Audinate license agreement the Dante Controller
program itself is not online on www.boschsecurity.com. This program is used for configuration
and routing of the OMNEO and/or Dante audio channels.
Installation
To install Dante Controller you will need to be logged on with administrator privileges. You do
not need to uninstall a previous version before installing an update. For device discovery by
Dante Controller for Windows, the Audinate 'Dante Discovery' service is used. Dante Discovery
is installed automatically with Dante Controller for Windows.
To install Dante Controller:
1.
2.
3.
4.
5.
6.
7.
2020-09 | V1.20 | PRAESENSA 1.20
View all Dante-enabled audio devices and their channels on the network.
View Dante-enabled device clock and network settings.
Route audio on these devices, and view the state of existing audio routes.
Change the labels of audio channels from numbers to names that suit you.
Customize the receive latency (latency before play out).
Save audio routing presets.
Apply previously saved presets.
Edit presets offline, and apply as configurations for new network deployments.
View and set per device configuration options.
View network status information, including multicast bandwidth across the network and
transmit and receive bandwidth for each device.
View device performance information, including latency statistics and packet errors.
View clock status information for each device, including frequency offset history and
clock event logs.
www.Audinate.com > Dante Controller, where the latest version of the Dante Controller
Ensure you are logged on to your computer as an administrator.
Navigate to and double-click the downloaded Dante Controller installer file.
Read the license agreement:
– If you agree to the terms, select the 'I agree' checkbox and click Install.
– If you do not agree to the terms, click Close.
Confirm / acknowledge any Windows security prompts that are displayed.
After installation the computer (PC) needs to reboot.
– A notification is displayed when the installation is finished.
See: Optional: Using Dante Controller, page 131
– IMPORTANT: Go to Optional: Using Dante Controller, page 131 after the PRAESENSA
configuration process has been finalized or when the configuration process is asking
for it.
Continue with: Logon the application, page 35
Configuration manual
PRAESENSA
Bosch Security Systems B.V.