Bosch PRAESENSA PRA-SCL Configuration Manual page 80

80 en | Configure the system
Item
Add
Rename
Delete
Submit
Add BGM routing
1.
2.
Rename BGM routing
The procedure for renaming BGM routing is similar to the procedure for Rename a zone. See
Zone options, page 75 .
Delete BGM routing
The procedure for delete BGM routing is similar to the procedure for Delete a zone. See Zone
options, page 75 .
Limit routing
You can specify a routing limit to BGM routing. To do so:
1.
2.
3.
2020-09 | V1.20 | PRAESENSA 1.20
Enter a name for the BGM in the Name text box.
Click the Add button. The procedure for Add BGM routing is similar to the procedure for
Add a zone. See Zone options, page 75 .
If the Limit routing checkbox is disabled, all available zones or zone groups can be made
part of the default routing for the BGM routing.
With Limit routing checkbox enabled, you can make a sub‑set of available zones and zone
groups and the BGM routing cannot be used outside this sub‑set:
– This function can be used for routing of e.g. a licensed BGM routing to specific
subscribers. In this case the default zones for this BGM routing at power on is again
a sub‑set of the specified routing limit.
– Also, zones and zone groups that are not part of the routing limit cannot be added to
the BGM routing selection via call station extension buttons.
Click the Submit button to store the settings:
Note that the changes are not permanent until the configuration is saved. See Save
–
configuration, page 102 .
Value Description
Button A new BGM routing can be added. See Add
BGM routing topic in this section.
Button An existing BGM routing can be renamed.
Automatically this name is replaced
everywhere in the configuration this BGM
routing is used. See Rename BGM routing
topic in this section.
Button An existing BGM routing can be deleted.
Automatically this BGM routing will be
removed everywhere in the configuration this
BGM routing is used. See Delete BGM routing
topic in this section.
Button Click the Submit button to store the settings:
Notice that you always have to Save the
configuration. See Save configuration, page
102
Configuration manual
PRAESENSA
Bosch Security Systems B.V.