Bosch PRAESENSA PRA-SCL Configuration Manual page 144

144 en | Event messages
–
–
Event: Fault input
Group: Fault
Occurrence: Logs the activation of a fault input.
Originator: Control input or Open Interface client that injected the fault.
Resolve:
–
–
Recommended action: Check the lines/connections and devices.
Extra information: Description of the error as configured by the user.
Event: Zone line fault
Group: Fault
Occurrence: Logs the activation of a zone line fault input.
Originator: Control input that injected the fault.
Resolve: When the input is deactivated or when the device disconnects (in case the event
occurred on a device).
Recommended action: Check zone lines/connections and devices.
Extra information: Name of the zones.
2020-09 | V1.20 | PRAESENSA 1.20
Which processor was the cause of the reset (CPU, TBD). Not available on Open lnterface
clients.
Event can only be generated when the device starts up. CPU only available on system
controllers.
When the input is deactivated or when the device disconnects (in case the event
occurred on a device).
When the Open lnterface client reports the event to be resolved or when the client
disconnects (in case the event occurred on an Open lnterface client).
Configuration manual
PRAESENSA
Bosch Security Systems B.V.