Chassis; Backplane; Fans; Mounting Rails - Bosch DIP-7080-00N Installation Manual

10 en | System overview
2.2.1

Chassis

The chassis includes 8 hard drive bays and supports a 2U backplane, 3 fans and two power
supplies.
2.2.2

Backplane

Each chassis comes with a 2U backplane. The backplane accepts SAS/SATA hard drives.
Warning!
Use caution when servicing and working around the backplane. Hazardous voltage or energy
!
is present on the backplane when the system is operating. Do not touch the backplane with
any metal objects and make sure no ribbon cables touch the backplane.
2.2.3

Fans

The chassis supports 3 system fans that are powered from the motherboard. These fans are
2U high and are powered by 3-pin connectors.
2.2.4

Mounting rails

The unit can be placed in a rack for secure storage and use. To setup your rack, follow the
step-by-step instructions included in this manual.
2.2.5

Power supply

Each chassis model includes 2 high-efficiency power supplies (redundant). In the unlikely
event your power supply fails, replacement is simple and can be accomplished without tools.
2.2.6

Air shroud

Air shrouds are shields, usually plastic, which conduct the airflow directly to where it is
needed. Always use the air shroud included with your chassis.
2.3

System interface

There are several LEDs on the front and rear of the chassis. The LEDs show the over-all status
of the system and the activity and health of specific components.
2013.09 | V2 | DOC Installation Manual
DIVAR IP 7000 2U
Bosch Sicherheitssysteme GmbH