Table of Contents
Advertisement
PRAESENSA
5.6
Call definitions
Using the Call definition page, call definitions can be defined.
Call definitions are used to make announcements, are custom made, and could contain several
characteristics as shown in the table following. To do so:
1.
2.
Item
Name
Priority
Maximum call duration
Start tone
Attenuation
Messages
Attenuation
Repetitions
Bosch Security Systems B.V.
Click the Call definitions page:
–
A call definition screen appears with the items as listed in the following table.
Select, enable, disable or enter (text in) each of the following items of the call definition:
Value
Description
Selection
Shows the name of the available call
definition (dropdown list). When no call
definition can be selected, create one by
using the Add button.
Selection
Select the call/announcement priority of the
(32‑255)
call definition from the list (255 highest
priority). See Priority and announcement
type, page 118 , if required.
Selection
Selection of a Maximum call duration avoids
(10, 20 and
blocking of zones by a high priority call/
40 s. 1, 2, 5, 10,
announcement that was started but not
and 20 min and
stopped, either by accident or because it
Unlimited
contains e.g. infinitely looping messages.
(default)).
Selection
If the call/announcement must use a start
tone, select a tone from the Start tone
dropdown list. See Recorded messages, page
68 and Tones, page 153 for an overview of
pre‑defined .WAV audio files.
Selection
Adjust the attenuation to set the volume level
(0 dB‑20 dB)
of the Start tone.
Selection
If the announcement must contain a specific
named Message, select it in the left area box
and click the > button to add it to the
Messages box of the call definition. This
Message name can also be selected on the
call station display, if this Message function is
configured. See also Call station, page 59 >
Recorded/Alert Messages.
Selection
Adjust the attenuation to set the volume level
(0 dB‑20 dB)
of the selected Messages.
Selection
Use the Repetitions box to specify how many
(0‑10/Infinite)
times the selected Messages must be
repeated.
0 = play once, 1 = repeat once (play message
twice).
Configuration manual
Configure the system | en
2020-09 | V1.20 | PRAESENSA 1.20
81
Advertisement
Table of Contents
