Bgm Routing - Bosch PRAESENSA PRA-SCL Configuration Manual

PRAESENSA
5.5.3

BGM routing

At the BGM routing page, background music (BGM) routing can be defined. A BGM routing
refers to an audio input in the system. Optionally, default zones and or default zone groups
can be connected to the routing. When the system is switched on, then the specified BGM is
routed to the connected zones and zone groups.
BGM routing configuration page
1.
2.
Item
Name
Type
Zones / Zone groups
> and <
Audio input
Limit routing
Routing
Bosch Security Systems B.V.
Below the Zone definitions page, click BGM routing:
– A screen appears listed the following items:
Select, enable or disable each of the following items:
Value Description
Selection Shows the name of the BGM routing
(dropdown list selection). See Add BGM
routing topic in this section.
Selection Selection between zones and zone groups as
available routing.
Selection The left box area shows the available zones
and zone groups. Zones (groups) are created
in Zone options, page 75 and Zone grouping,
page 77
Buttons Using the > and < buttons, selected zones
and zone groups can be added to, or removed
from, Routing (the right area box).
Selection Select the Audio input that provides the
background music. Notice that the inputs 9
up to 16 are secured (Dante/OMNEO
channels) to the amplifier. The same Audio
input may not be assigned to different BGM
routing. Each BGM routing must have a
unique audio input.
Enable / Disable Enable: The center box area shows the zones
and zone groups that are allowed to receive
the BGM routing. This center box area is not
visible if the Limit routing checkbox is
disabled. Using the > and < buttons, selected
zones and zone groups (left area box) can be
added to, or removed from Limit Routing (the
middle area box). See also the Limit routing
topic in this chapter.
Selection The right box area shows the zones and zone
groups that are assigned to the selected BGM
routing at system start‑up. Using the > and <
buttons, selected zones and zone groups (the
left or middle area box) can be added to, or
removed from Routing (right area box).
Configuration manual
Configure the system | en
2020-09 | V1.20 | PRAESENSA 1.20
79