(Mandatory) Software - Bosch PRAESENSA PRA-SCL Configuration Manual

16 en | Getting started
3.2.2

(Mandatory) software

The following software is essential to configure and operate PRAESENSA and must be
installed on the computer which will be used to configure and operate the PRAESENSA
system. It is made online available as follows:
–
–
Notice!
The files with the * character in front are part of the .zip file and can optionally be installed.
Optional (software)
–
–
–
–
–
2020-09 | V1.20 | PRAESENSA 1.20
From www.boschsecurity.com > PRAESENSA product section (i.e. the system controller)
the .zip file named:
PRAESENSA Installation Package x.xx.zip
(where x.xx is the version release number and will be changed at updates).
The installers directory of the .zip includes the following files:
– redist
– Bosch PRAESENSA Firmware.exe
– *: Bosch PRAESENSA Logging Server.exe
– *: Bosch PRAESENSA Logging Viewer.exe
– *: Bosch-OpenInterface‑Net‑installer.exe
From https://licensing.boschsecurity.com/OMNEO/html/load.htm?1000
upload tool Vx.xx (where x.xx is the version release number and will be changed at
updates). It includes:
– SetupOMNEOFirmwareUploadToolBundle(64).exe (two versions 32‑bit and 64‑bit):
The Firmware Upload Tool (FWUT) is used for uploading device firmware and Domain
Name System Service Discovery (DNS‑SD). It is required to install the FWUT on the
PRAESENSA configuration PC, then automatically also the Bosch DNS‑SD Service is
installed. This service is needed to access PRAESENSA devices via their hostname
instead of the IP‑address.
Tones, page 153
– PRAESENSA pre‑defined tones (.wav). Go to www.boschsecurity.com > PRAESENSA
product section > system controller > Downloads.
**: Optional: Install OMNEO Control, page 24 :
– The OMNEO Control software enables users to configure audio devices, and to route
audio all over the network.
**: Optional: Install (OMNEO) Network Docent, page 25 :
– The software scans and visualizes the network environment, giving insight into all
devices and cable‑connections. Docent is able to identify and provide guidance on
solving common and simple network errors.
**: Optional: Install Dante Controller, page 27 :
– Dante Controller is a software application provided by Audinate, which allows users
to configure and route audio around Dante networks.
*: Optional: Install the Open Interface, page 29 :
th
– For 3 party applications the Open Interface needs to be installed on your
PRAESENSA configuration computer.
Configuration manual
PRAESENSA
the Firmware
Bosch Security Systems B.V.