Bosch PRAESENSA PRA-SCL Configuration Manual page 56

56 en | Configure the system
Item
Local BGM on/off
Local BGM volume
control
Activation (Act on contact)
Sets the open or closed contact action of the control input.
Contact make
Contact break
Supervision
Submit
Control outputs
Control outputs can be used to send signals to third party equipment to trigger actions. Each
control output connection has three pins.
For connection options, see the PRAESENSA installation manual. For a functions overview, see
Action definitions, page 84 .
–
1.
2.
Item
MPSn-[#01]-[#08] Enable / Disable
Function
Sets the functionality of the control output. See also Call definitions, page 81 .
2020-09 | V1.20 | PRAESENSA 1.20
Value
Selection
Selection
Selection
Selection
Enable /
Disable
(by default
enabled)
Button
The multifunction power supply has eight control outputs which could be individual
configured.
Click the + of the Control outputs category to configure each individual control output of
the selected MPS.
Select, enable or disable each of the following items:
Value
Description
See Action definitions,
page 84
See Action definitions,
page 84
The action will be started
or stopped at contact
close.
The action will be started
or stopped at contact
open.
Switches supervision of the
control input on (Enable)
or off (Disable). See the
PRAESENSA installation
manual for supervision
connection options.
Click the Submit button to
store the settings. Notice
that you always have to
Save the configuration. See
Save configuration, page
102
Description
Enabled on default. Unique name for the control
output. To deactivate, a control output must be
disabled. See Add a device, page 41 for the naming of
the MPSn.
Configuration manual
PRAESENSA
Added functionality at
selected function
N.a.
N.a.
N.a.
N.a.
N.a.
N.a.
Bosch Security Systems B.V.