Bosch PRAESENSA PRA-SCL Configuration Manual page 83

PRAESENSA
Item
End time
Interval
Add
Rename
Delete
Submit
Add (create) a call definition
1.
2.
3.
4.
5.
Delete a call definition
Proceed as follows to delete a call definition:
1.
2.
3.
4.
Bosch Security Systems B.V.
Click the Add button to add/create a new call definition.
Enter the name of the new call definition in the Name text box:
– It may consist of up to 16 characters, maximum.
Click the OK button to add the call definition to the list of call definitions in the system.
Select, enable or disable each of the items (see previous table) to define the call
definition:
Click the Submit button to store the changes:
Note that the changes are not permanent until the configuration is saved. See Save
–
configuration, page 102 .
Select the call definition that has to be deleted from the Name dropdown list.
Click the Delete button to delete the call definition.
– A pop-up window asks to confirm this choice.
Click the OK button to confirm that the call definition must be deleted:
– The deleted call definition is no longer available from the Name dropdown list.
Click the Submit button to store the changes:
– Note that the changes are not permanent until the configuration is saved. See Save
configuration, page 102 .
Value Description
Enter Enter the time to end the schedule
hh/mm announcement on the enabled day(s). After
the End time, the announcement will not be
repeated.
Enter Enter the interval time period in the Interval
hh/mm text box.
Button A new call definition can be added and
defined.
Button An existing call definition can be renamed.
Automatically this name is replaced
everywhere in the configuration where this
call definition is used.
Button An existing call definition can be deleted
from the system configuration.
Button Click the Submit button to store the settings:
Notice that you always have to Save the
configuration. See Save configuration, page
102 .
Configuration manual
Configure the system | en
2020-09 | V1.20 | PRAESENSA 1.20
83