Bosch PRAESENSA PRA-SCL Configuration Manual page 47

PRAESENSA
Front panel indicators
The front panel indicators indicate correct functionality and faults. The table following
indicates the active state.
To make device identification visible, see System composition, page 40 .
Front panel indicators
Rear panel indicators and controls
The rear panel indicators indicate correct functionality and faults. The table following
indicates the active state.
To make device identification visible, see System composition, page 40 .
Rear panel indicators and controls
Refer to
–
–
Bosch Security Systems B.V.
Device fault present
Network link present
Network link lost
Standby for redundancy
SD card busy; do not
remove
Device fault present
Device reset (to factory
default)
Logon the application, page 35
Optional: Install Dante Controller, page 27
Yellow
Green
Yellow
Blue
Green
Yellow
Button
Configuration manual
Configure the system | en
Power on
Identification mode /
Indicator test
100 Mbps network
1 Gbps network
Power on
Identification mode /
Indicator test
2020-09 | V1.20 | PRAESENSA 1.20
47
Green
All LEDs blink
Yellow
Green
Green
All LEDs blink