Table of Contents
Advertisement
94
en | Configure the system
5.7.6
Call station
On the Action definitions page of the call station, call station and call station extension actions
could be defined.
Functions and operations
See Assigning a function, page 85 for functions and Assigning an operation, page 84 for
operations (behaviors) available for the call station and call station extension.
Configure a call station action
In the General section, the properties of the press‑to‑talk (PTT) button of the call station can
be defined. This button has default the PTT action. To do so:
1.
2.
3.
4.
Item
Press to talk
Operation
Call definition Selection
Depending of the selected Function, different parameters could be selected, entered,
added/removed. See Assigning a function, page 85 for descriptions.
Submit
2020-09 | V1.20 | PRAESENSA 1.20
Below the Action definitions configuration page, click call station:
–
A screen appears with an overview of the connected call station(s).
Select and click the name of the call station to be configured:
–
A General section row and, if one or more call station extension(s) connected, call
station extension section rows appearing.
–
A Submit button appears.
Click the + of the General row:
–
A screen appears listed the following items:
Select the following items to configure the actions of the Call station Press to talk button.
Value
Static text
Selection
Button
Description
Shows the name Press to talk (PTT) of the PTT button of the
call station selected and cannot be changed.
Select the operation of the function to be used from the
dropdown list. See Assigning an operation, page 84 .
Select the Call definition to be used from the dropdown list.
See Call definitions, page 81
Click the Submit button to store the changes. Note that the
changes are not permanent and active until the configuration
is saved. See Save configuration, page 102 .
Configuration manual
PRAESENSA
Bosch Security Systems B.V.
Advertisement
Table of Contents
