Bosch PRAESENSA PRA-SCL Configuration Manual page 78

78 en | Configure the system
Zone grouping configuration page
Below Zone definitions, click Zone grouping:
1.
Item
Zones
Name
> and <
Zone group
Add
Rename
Delete
Submit
Add a zone group
1.
2.
Rename a zone group
The procedure for renaming a zone group is similar to the procedure for Rename a zone. See
Zone options, page 75 .
Delete a zone group
The procedure for deleting a zone group is similar to the procedure for Delete a zone. See
Zone options, page 75 .
2020-09 | V1.20 | PRAESENSA 1.20
– A screen appears listed the following items:
Select each of the following items:
Enter a name for the zone group in the Name text box.
Click the Add button. The procedure for creating a zone group is similar to the procedure
for Add a zone. See Zone options, page 75 .
Value Description
Selection Shows the available audio zones (left box
area). Zones can be created in Zone options,
page 75
Selection Shows the name of the zone group
(dropdown list selection). See Add a zone
group topic in this section.
Buttons Using the > and < buttons, selected zones
can be added to, or removed from, zone
groups.
Selection Shows the zones that have been assigned to
the zone group (right box area). See Add a
zone group topic in this section.
Button A new zone group can be added. See Add a
zone group topic in this section.
Button An existing zone group can be renamed.
Automatically this name is replaced
everywhere in the configuration where this
zone group is used. See Rename a zone group
topic in this section.
Button An existing zone group can be deleted from
the system configuration. Automatically this
zone group is deleted everywhere in the
configuration where this zone group is used.
See Delete a zone group topic in this section.
Button Click the Submit button to store the settings:
Notice that you always have to Save the
configuration. See Save configuration, page
102
Configuration manual
PRAESENSA
Bosch Security Systems B.V.