Table of Contents
Advertisement
6
en | General information
1
General information
The purpose of this configuration manual is to provide all required information needed for the
configuration/programming of the Bosch PRAESENSA products. It will guide new users
step‑by‑step and serves as a reference for experienced users.
–
–
Manual content
Refer to the following sections before and during configuration of your system:
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Refer to
–
1.1
Intended audience
This configuration manual is intended for everyone who is authorized to do the configuration
of PRAESENSA and related products.
2020-09 | V1.20 | PRAESENSA 1.20
Unless required for the configuration of the products, this manual does not describe
hardware installation instructions. Refer to Related documentation, page 7 .
This manual, or an update, in pdf format is available as download from
www.boschsecurity.com > PRAESENSA product section. Refer to Related documentation,
page 7 .
Chapter 1: General information, page 6 - gives information on the intended audience,
training, available documentation, explains how to use this manual and provides a
high‑level introduction description of the PRAESENSA Public Address and Voice Alarm
System.
Chapter 2: Product overview, page 13 - gives an PRAESENSA product overview.
Chapter 3: Getting started, page 14 - describes software installation instructions and
important procedures which have to take into account before, and during, configuration.
Chapter 4: Logon the application, page 35 - describes how to logon the PRAESENSA
webserver webpages and important procedures which have to take into account before,
and during, configuration logon.
Chapter 5: Configure the system, page 37 - describes everything what you have to know
about the configuration of a PRAESENSA system.
Chapter 6: Diagnose, page 105 - describes i.e. configuration, amplifier loads and battery
impedance diagnostics.
Chapter 7: Security, page 112 - describes how to change security credentials, reconnect
lost and disconnected devices and Open Interface client certificate connections.
Chapter 8: Print configuration, page 115 - describes how to print device and/or system
configuration settings.
Chapter 9: About, page 117 - describes how to view certificates and (Open Source
Software) licenses.
Chapter 10: Introduction to make an announcement, page 118 - describes what, and how,
to setup announcement content, priority and routing.
Chapter 11‑16: Describes how to use different (3
Chapter 17: Troubleshooting, page 133 - describes PRAESENSA troubleshoot options.
Chapter 18: Event messages, page 134 - provides information about (general and fault)
events which could generated by the PRAESENSA system.
Chapter 19: Tones, page 153 - provides information of tones (messages) to be used with
PRAESENSA.
Chapter 20: Support and academy, page 161 - provides (technical) support and training
information.
Support and academy, page 161
Configuration manual
th
party) applications with PRAESENSA.
Bosch Security Systems B.V.
PRAESENSA
Advertisement
Table of Contents
