Zone Definitions; Call Definitions - Bosch PRAESENSA Manual

PRAESENSA
6.4.5

Zone definitions

On the Zone definitions pages, the amplifier output channels and zone routing can be defined.
It is possible to configure:
6.4.6

Call definitions

Using the Call definition page, call definitions can be defined.
Call definitions are used to make announcements, are custom made, and could contain several
characteristics as shown in the table following. To do so:
Topic Feature or option
Configure /
programming
Call definitions Call definitions
(Configuring /
definition of
announcements
/ calls.)
Bosch Security Systems B.V.
Permitted Possible settings
in UL2572
(Y/N/
required)
Yes Priority
Required Alarm
Yes Start tone
Yes Attenuation of start tone
Yes Messages
Yes Attenuation of message
Yes Repetitions
Underwriters Laboratories Listing Document (ULLD)
Programming options | en 137
Value Settings
permitted in
UL2572
Selection (32‑255) > 224 for
emergency
use. Other
values for
Ancillary
function
Selection (None / Set for
Emergency Emergency in
case priority
is > 224
Selection A start tone
fit for the
intended
purpose
Selection (0 dB‑20 Make sure
dB) speech
intelligibility
is sufficient
Selection One or more
messages or
tones fit for
the intended
purpose
Selection (0 dB‑20 Make sure
dB) speech
intelligibility
is sufficient
Selection (0‑10/ The number
Infinite) of repetitions
fit for the
intended
purpose
Only Infinite
is allowed.
2021.12.21 | V0.15b | F.01U.402.882