Arm If Single User Area; Arm All User Areas - Bosch Solution 16plus Installation Manual

Solution 16
plus Installation Manual Access Programming
 
To Arm In Part Mode
Present the token three times within 5 seconds and the area will arm
in Part Mode 2.

Arm If Single User Area

This option allows a roaming reader to turn on only the first area that
the token user has been assigned to (ie multi area user). This allows
the user to log on when the token is swiped the second time. Swiping
the token a third time will turn the first area that the user has been
assigned to All On.

Arm All User Areas

This option allows a token user to turn on or off all areas that the
user has been assign to at the same time. This option can be set per
reader.
i
NEW in Software version 1.02 and later.
Note
» » E N D O F S E C T I O N « «
5-10
Bosch Security Systems 05/10 BLCC100I