Common Fault Analysis - INVT Goodrive 300 Operation Manual

inverters
Goodrive300
Ethernet
E-NET communicatio
n fault
CANopen
E-CAN communicatio
n fault

8.6 Common fault analysis

8.6.1 The motor does not work
 The Ethernet address is not
set right.
 The Ethernet communication
is not selected to right.
 The ambient interference is
too strong.
 The connection is not sound
 Corresponding resistor is not
dialed
 The communication is
uneven
225
Fault tracking
 Check the relative setting.
Check the communication
method selection.
 Check the environment and
avoid the interference.
 Check the connection
 Draw out the correspond resistor
 Set the same baud rate