INVT Goodrive 300 Operation Manual page 59

inverters
Goodrive300
Functi
on Name
code
time
Dead time
of
P01.13
FWD/REV
rotation
Shifting
between
P01.14
FWD/REV
rotation
Detailed instruction of parameters
effect.
The braking time of stop braking: the retention time
of DC brake. If the time is 0, the DC brake is
invalid. The inverter will stop at the set deceleration
time.
Setting range of P01.09: 0.00~P00.03
Setting range of P01.10: 0.0~50.0s
Setting range of P01.11: 0.0~150.0%
Setting range of P01.12: 0.0~50.0s
During the procedure of switching for/rev rotation,
set the threshold by P01.14, which is as the table
below:
Setting range: 0.0~3600.0s
Set the threshold point of the inverter:
0:Switch after zero frequency
1:Switch after the starting frequency
2: Switch after the speed reach P01.15 and delay
58
Function codes
Default Modif
value y
○
0.0s
◎
0