INVT Goodrive 300 Operation Manual page 74

inverters
Goodrive300
Functi
on Name
code
control
speed
Compensat
ion
P03.28 coefficient
of static
friction
Compensat
ion
P03.29 coefficient
of dyanmic
friction
P04 Group V/F control
Motor 1V/F
P04.00 curve
setting
Detailed instruction of parameters
0.0~100.0%
Adjust P03.28 to compensate the coefficient of
static friction. Only valid when setting in 1Hz.
0.0~100.0%
Adjust P03.29 to compensate the coefficient of
static friction. Only valid when setting in 1Hz.
These function codes define the V/F curve of
Goodrive300 motor 1 to meet the need of different
loads.
0:Straight line V/F curve；applying to the constant
torque load
1:Multi-dots V/F curve
th
2:1.3 power low torque V/F curve
th
3:1.7 power low torque V/F curve
th
4:2.0 power low torque V/F curve
Curves 2~4 apply to the torque loads such as fans
and water pumps. Users can adjust according to
the features of the loads to achieve a best
energy-consuming effect.
5:Customized V/F(V/F separation)； on this mode, V
and F can be separated from f and f can be
adjusted through the frequency given channel set
by P00.06 or the voltage given channel set by
73
Function codes
Default Modif
value y
0.0%
0.0%
◎
0