INVT Goodrive 300 Operation Manual page 105

inverters
Goodrive300
Functi
on Name
code
P08.05 DEC time 4
Jogging
P08.06
frequency
Jogging
P08.07
ACC time
Jogging
P08.08
DEC time
Jumping
P08.09
frequency 1
Jumping
P08.10 frequency
range 1
Jumping
P08.11
frequency 2
Jumping
P08.12
frequency
range 2
Jumping
P08.13
frequency 3
Jumping
P08.14 frequency
range 3
Detailed instruction of parameters
This parameter is used to define the reference
frequency during jogging.
Setting range: 0.00Hz ~P00.03(the Max.
frequency)
The jogging ACC time means the time needed if
the inverter runs from 0Hz to the Max. Frequency.
The jogging DEC time means the time needed if
the inverter goes from the Max. frequency (P0.03)
to 0Hz.
Setting range:0.0~3600.0s
When the set frequency is in the range of jumping
frequency, the inverter will run at the edge of the
jumping frequency.
The inverter can avoid the mechanical resonance
point by setting the jumping frequency. The inverter
can set three jumping frequency. But this function
will be invalid if all jumping points are 0.
Setting range: 0.00~P00.03(the Max. frequency)
104
Function codes
Default Modif
value y
on
model
Depend
○
on
model
○
5.00Hz
Depend
○
on
model
Depend
○
on
model
○
0.00Hz
○
0.00Hz
○
0.00Hz
○
0.00Hz
○
0.00Hz
○
0.00Hz