5.6 Configuring Redundant Recording
Purpose:
Enabling redundant recording and capture, which means saving the record files and captured pictures not only in
the R/W HDD but also in the redundant HDD, will effectively enhance the data safety and reliability. .
Steps:
1. Enter HDD Information interface.
Menu> HDD
2. Enter the Record setting interface.
Menu> Record> Parameters
1)
Select Record tab.
2)
Click More Settings to enter the following interface.
3)
Select Camera you want to configure in the drop-down list.
4)
Check the checkbox of Redundant Record.
5)
Click OK to save settings and back to the upper level menu.
Repeat the above steps for configuring other channels.
User Manual of LV-N9600 Series NVR
Figure 5. 20 HDD General
Figure 5. 21 Encoding Record
83