Table of Contents
Advertisement
User Manual of Network Video Recorder
5.8 Configuring Redundant Recording
Purpose:
Enabling redundant recording, which means saving the record files and captured pictures not only in the R/W
HDD but also in the redundant HDD, will effectively enhance the data safety and reliability. .
Steps:
1. Enter HDD Information interface.
Menu> HDD
2. Select the HDD and click
1)
Set the HDD property to Redundancy.
2)
Click Apply to save the settings.
3)
Click OK to back to the upper level menu.
You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property to
Redundant. For detailed information, please refer to Chapter 11.4.1 Setting HDD Property. There should be
at least another HDD which is in Read/Write status.
3. Enter the Record setting interface.
Menu> Record> Parameters
1)
Select Record tab.
Figure 5. 24 HDD General
to enter the Local HDD Settings interface.
Figure 5. 25 HDD General-Editing
70
Advertisement
Table of Contents
