Table of Contents
Advertisement
5.8 Configuring Redundant Recording
Purpose:
Enabling redundant recording, which means saving the recording files not only in the R/W HDD but also in the
redundant HDD, will effectively enhance the data safety and reliability. .
Steps:
1.
Enter HDD Information interface.
Menu > HDD
2.
Select the HDD and click
1)
Set the HDD property to Redundancy.
2)
Click Apply to save the settings.
3)
Click OK to back to the upper level menu.
You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property to
Redundant. For detailed information, please refer to Chapter 12.3.2 Setting HDD Property. There should
be at least another HDD which is in Read/Write status.
3.
Enter the Record setting interface.
Menu > Record > Parameters
Select Record tab.
1)
Click More Settings to enter the following interface.
1)
Network Video Recorder User Manual
Figure 5. 22 HDD General
to enter the Local HDD Settings interface.
Figure 5. 23 HDD General-Editing
85
Advertisement
Table of Contents
