2.1 GUI Introduction
● Click Target Detection at the upper-left corner, and select
live target detection results. For result details, click View More.
Note
○ Target Detection is only available for certain models.
○ Target Detection is valid when HDD is installed.
○
is valid for motion detection, line crossing detection, intrusion detection, and facial
detection.
● Click
to start/stop auto-switch. The screen will automatically switch to the next one.
● Click
to enter full screen mode.
● Double click a camera to view it in single-screen mode. Double click again to exit single-screen
mode.
● Change a camera live view screen by dragging it from its screen to the desired screen.
● Scroll up/down to turn to previous/next screen.
● Position the cursor on a camera to show shortcut menu.
Button
Network Video Recorder User Manual
Chapter 2 Live View
Figure 2-1 Shortcut Menu
Table 2-1 Shortcut Menu Description
Click to capture.
Start playing videos recorded in the latest five minutes.
Digital zoom. You can adjust zoom-in times and view the desired area.
Click it to enter PTZ control mode.
Turn on/off live view audio.
Click to start two-way audio between NVR and network camera.
Note
Ensure that the network camera supports two-way audio.
or
Description
5
to display the specified