11.1 Configure Live View Layout
Live view displays the video image of each camera in real time.
Steps
1. Go to Live view .
2. Click
at the lower-right corner.
3. Select a window division type, or click Custom to customize a new type as your desire.
4. Move the cursor on Default View in View.
5. Click
.
6. Set the live view image output interface.
7. Click
.
11.2 GUI Introduction
You can view live image, play live audio, capture pictures, perform instant playback, etc.
No.
1
2
3
Network Video Recorder User Manual
Chapter 11 Live View
Figure 11-1 Live View
Table 11-1 Interface Description
Channel list, PTZ control panel, and target detection list.
Right-click shortcut menu. It will appear after right
clicking the cursor on the image area.
Channel tool bar.
Description
39