Chapter 2 Live View; Gui Introduction - HIKVISION DS-7100NI-Q1/P Series User Manual

2.1 GUI Introduction

Click Target Detection at the upper-left corner, and select
●
target detection results. For result details, click View More.
Note
Target Detection is only available for certain models.
○
Target Detection is valid when HDD is installed.
○
is valid for motion detection, line crossing detection, intrusion detection, and facial
○
detection.
Click to start/stop auto-switch. The screen will automatically switch to the next one.
●
Click to enter full screen mode.
●
Double click a camera to view it in single-screen mode. Double click again to exit single-screen
●
mode.
Change a camera live view screen by dragging it from its screen to the desired screen.
●
Scroll up/down to turn to previous/next screen.
●
Position the cursor on a camera to show shortcut menu.
●
Button
In the live view interface, there are icons at the upper-right corner of the screen for each
●
camera, showing the camera recording and alarm status.
Network Video Recorder User Manual

Chapter 2 Live View

Figure 2-1 Shortcut Menu
Table 2-1 Shortcut Menu Description
Start playing videos recorded in the latest five minutes.
Digital zoom. You can adjust zoom-in times and view the desired area.
Click it to enter PTZ control mode.
Turn on/​ o ff live view audio.
Switch video stream.
Display rule frame and target frame.
Adjust image display effect according to the screen size.
or
Description
5
to display the specified live