Detecting Video Tampering Alarm - HIKVISION iDS-9632NXI-I8/16S User Manual

9.4 Detecting Video Tampering Alarm

Purpose:
Trigger alarm when the lens is covered and take alarm response action(s).
Step 1 Go to Menu >Camera >Video Tampering.
Step 2 Select a channel you want to detect video tampering.
Step 3 Set the video tampering handling action of the channel.
1) Check the checkbox of "Enable Video Tampering Detection".
2) Drag the sensitivity bar to set a proper sensitivity level. Use the mouse to draw an area
you want to detect video tampering.
3) Click button to set up handling action of video tampering.
Step 4 Set arming schedule and alarm response actions of the channel.
1) Click Arming Schedule tab to set the arming schedule of handling actions.
2) Choose one day of a week and Max. eight time periods can be set within each day.
3) Click Apply button to save the settings.
Time periods shall not be repeated or overlapped.
Network Video Recorder User Manual
Figure 9-11 Video Tampering Setting Interface
133