Table of Contents
Advertisement
User Manual of DS-7600NI Series NVR
8.4 Detecting Video Tampering Alarm
Purpose:
Trigger alarm when the lens is covered and take alarm response action(s).
Steps:
1. Enter Video Tampering interface of Camera Management and select a channel you want to detect video
tampering.
Menu> Camera> Video Tampering
2. Set the video tampering handling method of the channel.
Check the checkbox of "Enable Video Tampering".
Drag the sensitivity bar and choose a proper sensitivity level. Use the mouse to draw an area you want to
detect video tampering.
Click
button to set up handling method of video tampering.
Figure 8. 12 Set Detection Area and Sensitivity of Video Tampering
3. Set arming schedule and alarm response actions of the channel.
1) Click Arming Schedule tab to set the channel's arming schedule.
2) Choose one day of a week and Max. eight time periods can be set within each day.
3) Click Apply button to save the settings.
Note:
Time periods shall not be repeated or overlapped.
Figure 8. 11 Video Tampering Setup Interface
115
Advertisement
Table of Contents
