How to Resolve Health Check Alerts
you to return to the updates view and apply them once the system has rebooted after the
upgrade is applied. This allows you to verify that the rest of the software is functional and a
rollback is not required before applying the update.
If you elect to not apply deferred updates during an upgrade, you can return to the updates
view at any point to apply the update. If deferred updates are available for the current software
version, they appear as a list below the current set of available updates, with an "Apply" button
to apply the updates. Deferred updates in a cluster take effect on both storage controllers
simultaneously, and can only be applied while both controllers are operational. Because
deferred updates are listed only for resources present on the local storage controller, in a cluster
it may be the case that deferred updates are available only for resources active on the peer
controller. In a cluster, it is therefore necessary to check both storage controllers to determine
the availability of deferred updates.
Note -
that increment the stream format version, it is no longer possible to replicate to an older system.
See the "Incompatible Target" failure in section
Appliance Administration Guide, Release
TABLE 52
Feature
"Support for Passthrough x Deferred
Update" on page 306
"Support for User Quotas Deferred
Update" on page 306
"Support for COMSTAR Deferred
Update" on page 306
"Support for Triple Parity RAID Deferred
Update" on page 305
"Support for Dedup Deferred Update" on page 305
"Support for Replication Deferred
Update" on page 305
"Support for Received Properties Deferred
Update" on page 305
"Support for Slim ZIL Deferred Update" on page 304
"Support for Snapshot Deletion Deferred
Update" on page 304
"Support for Recursize Snapshots Deferred
Update" on page 304
"Support for Multi Replace Deferred
Update" on page 304
"Support for RAIDZ Mirror Deferred
Update" on page 303
300
Oracle ZFS Storage Appliance Customer Service Manual • February 2016
Replication does not work across deferred updates. After deferred updates are applied
Deferred Updates
"Replication Failures" in Oracle ZFS Storage
2013.1.5.0.
Version introduced
2009.Q2.0.0
2009.Q3.0.0
2009.Q3.0.0
2009.Q3.0.0
2010.Q1.0.0
2010.Q1.0.0
2010.Q1.0.0
2010.Q3.1.0
2010.Q3.1.0
2010.Q3.1.0
2010.Q3.1.0
2011.1.0.0
Need help?
Do you have a question about the ZFS ZS3 Series and is the answer not in the manual?
Questions and answers