Oracle ZFS ZS3 Series Customer Service Manual page 287

clownfish:maintenance system updates ak-nas@2009.04.03,1-0> help properties
Properties that are valid in this context:
version
date
status
update_zfs_upgrade
clownfish:maintenance system updates ak-nas@2009.04.03,1-0> get
clownfish:maintenance system updates ak-nas@2009.04.03,1-0> set
update_zfs_upgrade=onreboot
clownfish:maintenance system updates ak-nas@2009.04.03,1-0>
Updating Software on Clustered Controllers
This section describes updating the system software for an Oracle ZFS Storage Appliance
with clustered controllers. Cluster update is also referred to as a rolling update. Controllers are
updated one at a time, and each controller is updated while it is not providing service to clients.
A cluster update can be performed using either the BUI or CLI.
Preconditions
Check the following conditions on both controllers immediately before applying an update:
Ensure that any resilvering operations have completed. Check using the BUI page
■
Configuration > Storage, or CLI context configuration storage.
Ensure that there are no active problems. See
■
Ensure no firmware upgrades are in progress. See
■
Upgrades" on page
Ensure no takeover operations are in progress.
■
Check the most recent release notes for additional preconditions that should be observed
■
for the software release. See
=> Update media version
=> Update release date
=> Update media status
=> Apply incompatible storage pool update
version = 2009.04.03,1-0
date = 2009-4-3 08:45:01
status = AKUP_WAITING
update_zfs_upgrade = deferred
update_zfs_upgrade = onreboot
307.
Oracle ZFS Storage Appliance: Software Updates (2021771.1)
Updating Software on Clustered Controllers
"Active Problems Display" on page
"Working with Firmware
Maintaining the System
29.
287