Oracle ZFS ZS3 Series Customer Service Manual page 277

How to Create a Configuration Backup (BUI)
Use the following procedure to create a configuration backup.
Go to Maintenance > System.
1.
2. Click the Backup button above the list of saved configurations and follow the
instructions. You are prompted to enter a descriptive comment for the backup.
How to Create a Configuration Backup (CLI)
Use the following procedure to create a configuration backup.
1. To back up a configuration, use the following CLI command. You are prompted
to enter a descriptive comment for the backup.
host:maintenance system configs> backup
Backup Configuration. Enter a descriptive comment for this configuration, and
click Commit to backup current appliance settings:
host:maintenance system configs conf_backup step0> set comment="pre-upgrade"
2. To execute the backup operation, use the following CLI command:
host:maintenance system configs conf_backup step0> done
host:maintenance system configs>
How to Restore from a Saved Configuration (BUI)
Use the following procedure to restore from a saved configuration.
Go to Maintenance > System.
1.
2.
Click the rollback icon
reverting the system to that saved configuration.
3. Confirm that it is okay to proceed after reviewing
Impact" on page
comment = pre-upgrade
on any saved configuration to begin the process of
275.
How to Create a Configuration Backup (BUI)
"Configuration Restore
Maintaining the System 277