Status - Barco STELLAR User And Service Manual

N

Status

Structure
Possible alarms
Syntax
Explanations and
remedies
Note!
Description Shows the stock number of the modules installed in the various
slots. Press ENTER and use the up/down arrow keys to scroll
through the list of installed modules.
Whenever one of the alarm-relays/LEDs are active, you may press the Status short-
cut key to read the list of alarms present in the decoder. If there are active alarms the
display shows "Press ENTER". Use the up/down arrow keys to scroll through the
list of active alarms. If there are no active alarms the display shows "No active
alarms".
The menu has the following structure:

Status

View alarms
Press Enter
The S supports displaying the text of the following alarms:
TELLAR
• Active net input err
• Audio output err
• Inactive net input err
• MPEG PSI err
• Network output err
• Video output err
If an alarm not listed above occurs, it is presented with a number in the display. For
an explanation of the message number, see
At the right most side of the display, a channel number may be displayed, for exam-
ple:
View alarms
36
The alarm text is an abbreviation of the ROSA message text. For further information
on the explanations and remedies, see
The alarm list is not dynamically updated while you are in the list. You have to exit
the list and enter it again to update the list.
00-013
ROSA messages, p. 123.
ch
1
ROSA messages, p. 123.
3
59
Status