Replacing An Ac Fuse In The Power Supply - Barco STELLAR User And Service Manual

5
N

Replacing an AC fuse in the power supply

To replace an AC fuse
120
Replacing an AC fuse in the power supply
Caution! There is a fuse in both phase conductors.
To replace an AC fuse do the following:
1. Turn off the power to the S
Remove the power cord from the S
2. Open the lid holding the fuses.
Use a flat bladed screwdriver.
3. Pull out the lid.
4. Remove the blown fuse.
5. Insert a new fuse with the same rating.
Caution! For continued protection against risk of fire replace only with same
type and rating of fuse.
6. Reinsert the lid.
98-017
.
TELLAR
.
TELLAR