Barco STELLAR User And Service Manual page 15

The output bit rate can be set between 1.0 and 9 2Mbit/s.
The SMPTE 310M output is a 19.39 Mbit/s data stream.
SDI genlock
The decoder optionally provides a black and burst reference input for genlocking of
the SDI video output. The line frequency of the composite video output is also locked
to the external reference but not the SCH phase.
VBI signals for PAL and
The following table gives an overview over the VBI signals supported for PAL and
NTSC systems
NTSC systems and their treatment in the S
VBI signal
Teletext
System B
Teletext
System C
VITS
Transparen
t VBI
TELLAR
Recovered from the TS
The S restores the tele-
TELLAR
text data from the transport
stream multiplex and modu-
lates and reinserts the teletext
signal in the composite video
output or embeds it in the SDI
output.
The S restores the tele-
TELLAR
text data from the transport
stream multiplex and modu-
lates and reinserts the teletext
signal in the composite video
output or embeds it in the SDI
output.
No.
4 VBI lines per fields are
transferred transparently. The
transparent VBI can be inserted
in the composite output or
embedded in the SDI output.
.
Inserted locally in PAL
the decoder
no yes
no no
VITS lines are yes
inserted locally in
the decoder. The
S provides
TELLAR
internally stored
VITS lines. These
signals may be
inserted in the
composite output of
the decoder. Up to
two VITS lines per
field can be inserted
in the composite
output or embedded
in the SDI output in
the decoder.
no yes
The S MPEG-2 Decoder
TELLAR
1
NTS
C
no
yes
yes
yes
3