Video Output - Barco STELLAR User And Service Manual

3
N

Video output

Structure
Video synchronization
48

Video output

When you press the Program shortcut key and the right arrow the "Video output
setup" menu appears.
Each parameter is described in the following. For instructions on how to edit the
parameters, see Navigating and editing, p. 39.
The menu has the following structure:
Video output setup
Video synchronization
<Locked/Free running/
Genlock>
Video information 1
Profile:___P@ML
Video information 2
Width: ___ Height:___
Video information 3
Chroma: ___ Aspect:__:_
Video information 4
Bitrate:__.______ Mbit/s
Video output format
<PAL> & <SDI625>
<PALplus> & <SDI625>
<NTSC> & <SDI525>
<PAL-M> & <SDI525>
Video line start
99-032
Line: __
Parameters Locked, Free running, Genlock
Description Locked means that the video output is locked to the encoder
video input frequency by using the PCR and PTS time stamps in
the video stream.
Free running means that the video output frequency is not
locked. Delay adjustments of both video and audio will be
performed to maintain the synchronization between video and
audio.
Note! This mode is useful if the S
synchronizing in locked mode (because of faulty PCR values in
the transport stream).
Genlock means that the video output is locked to an external
reference which is a composite black and burst signal. The signal
is applied at the REF IN connector at the connector panel
(option).
Note! The SCH phase of the composite output is not locked to
the external reference.
is always re-
TELLAR