Chapter 6: System Information; System Status; System Settings - Barco NGS-D200 User Manual

Chapter 6: System Information

The System Information page provides the following system status and access to system settings

System Status

Software Information: provides build version number, date, serial number, model type and license type for the
l
device.
Firmware Information: provides firmware versions and dates of different firmware on the device.
l
System Information: provides uptime and load average.
l
Memory Utilization: provides system memory utilization
l
System Time: shows system time and NTP status
l
Temperature and Fan Information: provides temperature of different critical components and zones on the
l
devices

System Settings

Fan Speed of the System: provides way to change the fan speed on the Device. The default fan speed option is
l
set to Auto (High). Other options are High, Medium and Low. After changing the settings, they take effect
immediately. To make the change persistent across reboots, hit Save Settings: button under left navigation panel
W
ARNING: It is highly recommended to not change the fan speed setting and leave it at factory default value of
Auto.
W
ARNING: Reducing the fan speed can adverse effect of the operation of the device and will reduce MTBF and
product reliability. If the fan speed is reduced (e.g. for acoustic purposes,), it shall be done at customers own risk. For
more information, see "Authorization Table" on page 33
K5903085
Chapter 6: System Information
24