Installing Drivers - Barco STELLAR User And Service Manual

N

Installing drivers

Communication driver
To install the
communication driver
To enable the COM port Follow the below procedure to enable the COM port:
Device driver
To install the device
driver
Before ROSA can communicate with the S
tion driver and enable the RS-232 serial port connected to the S
Follow the procedure below to install the communication driver:
1. Right-click on the drivers icon in the C
select Properties.
2. Click Install and go to the directory C:\ROSAConfShell\C
ers.
3. Locate the "RCDS Communication Driver.rsd" and click Open.
This configuration file contains driver-related information needed by the C
server. The initial version of a driver is delivered on the C
NICUS
server.
1. Right-click on the Serial Ports icon in the C
and select Properties.
2. Double-click on the COM port connected to the S
3. Set the Driver type to RCDS Protocol and click OK twice.
Now ROSA communicates with the S
Before a C server can recognize a S
OPERNICUS
the driver for the S on the C
TELLAR
makes it possible for the C
OPERNICUS
commands and receive status information and alarm messages.
This specific driver is a Remote Control and Diagnostic System (RCDS) device
driver, which contains the user interface to set up the S
for the S once from a ROSA client.
TELLAR
To install a driver for the S
TELLAR
1. Right-click on the Drivers icon in the C
2. Select Properties to bring up the details of the drivers available.
ROSA displays the installed drivers.
3. Click Install.
4. Go to the directory C:\ROSAConfShell\C
5. Locate the specific driver configuration file, in this case "S
Device.rsd" and click Open.
This configuration file contains driver related information needed by the C
server. The initial version of a driver is delivered on the C
NICUS
server.
you must install the communica-
TELLAR
Explorer window and
OPERNICUS
Explorer window
OPERNICUS
TELLAR
.
TELLAR
attached to it, you must install
TELLAR
server. The specific S
OPERNICUS
server to communicate with the S
. You install this driver
TELLAR
do the following:
Explorer window.
OPERNICUS
\Drivers.
OPERNICUS
4
.
TELLAR
\Driv-
OPERNICUS
-
OPER
OPERNICUS
.
driver
TELLAR
, send
TELLAR
TELLAR
-
OPER
OPERNICUS
67

Installing drivers