Barco STELLAR User And Service Manual page 123

1. Connect the switch between contact closure 1 and ground.
In the "program 2" position the contact is open, in the "program 1" position it is
closed.
2. Type in the below macros and press Enter after each line.
MACRO 1 OPEN REC
PROGSEL=MAN,1
MACRO END
MACRO 1 CLOSE REC
PROGSEL=MAN,2
MACRO END
Useful hints for macro The following hints are useful when writing macros.
writing
• If desired, a macro can contain several command lines.
• Force-execute a macro by typing "MACRO <number> <contact>" and pressing
Enter.
Force-executing a
Executing the "MACRO 1 OPEN" command with the above macro causes the S
macro, example to activate program 1, while executing the "MACRO 1 CLOSE" command
LAR
causes the S to activate program 2.
TELLAR
4
-
TEL
111
Macro commands