Barco STELLAR User And Service Manual page 127

2. Select one of the unused lines from the list and click the New button.
3. Type in the name of the recording and click the OK button.
The codec file is stored locally on the ROSA PC. In a ROSA/C
tem the program profile is stored on the C
4. Click Apply.
To download settings Do as follows to download settings to the S
1. From the Copernicus Explorer right click on the S
select properties.
Note!
2. Click on the relevant profile tab.
Use the Codec profile tab to download settings from a local ROSA PC, or click
on the Program profile tab to download settings from the C
3. Select the profile to download.
4. Click Activate.
Server busy window
During download of a profile, the following window may appear if you operate the
PC before the download has finished:
If it appears, just press the Retry button, and wait until the download has finished.
TELLAR
The decoder to which you are downloading settings must have the
same hardware configuration as the one from which you have
uploaded the settings.
OPERNICUS
server.
OPERNICUS
:
to update and
TELLAR
OPERNICUS
Setting up the profiles
4
sys-
server.
115