Codec-Specific User Interface - Barco STELLAR User And Service Manual

N

Codec-specific user interface

General
Tab pages
The codec specific user interface is activated by right-clicking on the wanted unit
from the C explorer window and selecting Properties.
OPERNICUS
The codec specific user interface consists of a number of tab pages:
T
The function of the tab pages is as follows:
• Codec Explorer
From this page you select the programs to activate, select program elements to
decode, and set up the values of the program elements.
• Messages
From this menu you set the various messages and alarms.
• Configuration
From this page you view the hardware and software configuration.
• Commands
From this page you may enter low level commands to the codec. For further infor-
mation, see the MPEG-2 Command reference, 983756.
• Clock
From this page you set the S
• Profile
From these pages you save the current S
another S .
TELLAR
clock and date.
TELLAR
settings for later download to
TELLAR

Codec-specific user interface

4
71